November 25, 2019

Sinonine improves the transmission coupling of the spiral sand washing machine

Sinonine has improved the transmission structure of the spiral sand washing machine and designed a more reasonable transmission coupling.
Because of the advantages of low energy consumption, good wear resistance and high quality of sand washing, the spiral sand washing machine is widely used in the cleaning, classification and dehydration links of sand washing plant. With the motor as the power source, the spiral washing machine drives the spiral shaft to rotate at a constant speed through the coupling after the reducer is decelerated, and the spiral shaft drives the mud sand and water flowing into the rear of the tank to mix, clean the impurities and mud, and make the original sand start to decompose gradually. The separated impurity mud is discharged through the drain pipe under the action of water flow, and the concentrate sand is transported to the discharge port under the rotation of the spiral blade for discharge, so as to achieve for sand washing purpose.

spiral sand washing machine
The standard elastic pin coupling and metal slider coupling are mainly used in the reducer and screw shaft coupling of the traditional spiral sand washing machine. The above two kinds of couplings have large overall dimensions, large weight, high purchase cost, complex installation and inconvenient disassembly.
Through continuous exploration, sinonine has designed a kind of coupling which is easy to install and fix and has low cost. The coupling of the spiral sand washing machine is realized through the following technical routes:
The coupling of the spiral sand washing machine is composed of a coupling block and a connecting slider, which is characterized in that: the coupling block includes a first coupling block with the same structure and connected with the reducer shaft respectively and a second coupling block connected with the spiral shaft; the two opposite sides of the connecting slider are respectively raised, and the two protrusions are perpendicular to each other; the first coupling block and the second coupling block are embedded and connected with the protrusion of the connecting slider through the surface groove. There is a connecting shaft hole on the coupling block, which is connected and fixed with the reducer shaft or spiral shaft. The connection and fixation can adopt interference fit and keyway fixing structure.
The installation steps of the coupling are as follows:
The first coupling block is installed on the output shaft of the reducer, the second coupling block is installed on the spiral shaft; the spiral shaft is assembled on the spiral sand washing box body; the reducer is hoisted to roughly align the output shaft and the spiral shaft of the reducer; the connecting slider is installed into the second coupling block of the spiral shaft; the reducer is assembled to clamp the first coupling block, the connecting block and the second coupling block of the spiral shaft of the reducer; and the coupling block is adjusted properly The coaxiality of the axial device completes the assembly of the main machine.
spiral sand washing machine

Suggestion: the transmission system is very important to the stability of the spiral sand washing machine. In the actual operation process, we should pay more attention to its working state.

Lasted news & technology
Nov 26 2020

The requirement of float-glass fine sand particle size is 0.1-0.5mm, the iron content of fine sand is below 600ppm, and the SiO2 content is above 98%. The specific production process of the line is as follows

Nov 02 2020

Due to the large amount of sludge and other wastes, the sewage after sand washing needs to be treated before it can meet the requirements of environmental protection.

Mar 04 2020

As the executive part of VSI sand making machine, the service life of the rotor directly determines the maintenance cycle and startup rate of the equipment.

Mar 03 2020

Spiral sand washing machine is an important equipment which is used to washing sand or dewatering.

Mar 01 2020

Sand washing machine is one of important equipments in sand washing plant.

Feb 29 2020

Attrition scrubber as one of the hot-sale machines in sand washing plant.

Feb 26 2020

Widely used equipment in the sand washing plant for muddy water treatment and dewatering process mainly includes: dewatering screen, spiral classifier, hydrocyclone, filter press, ceramic filter, Rotary centrifuge ,desliming cone and so on.

Feb 24 2020

Recently, the production of Sinonine quartz sand processing and sand washing equipment is busy.

Contact us

Thank you for your interests in Sinonine, Please feel free to submit your inquiry information to us, our expert will contact with you as soon as possible.