In the sand making plant and sand washing plant, a large amount of water will be used to clean the clay and impurity in the sand, so as to obtain clean sand. Due to the large amount of sludge and other wastes, the sewage after sand washing needs to be treated before it can meet the requirements of environmental protection. In addition, as water resources are becoming more and more scarce and precious, the treated water can also be returned to the sand washing system for recycling, thus saving water resources and reducing water production costs. Therefore, the treatment of wastewater in sand washing plant is of great significance.
Solution of sewage treatment in sand washing plant
After long-term research and practice, sinonine has developed a set of water treatment system with low price and good effect, which is used for wastewater treatment of sand washing production line. After treatment, the solid and liquid in the wastewater are fully separated, and the solid becomes transportable and discharged as a by-product. The liquid water can be directly discharged or recycled.
The sand washing water treatment system includes two stages: thickening and filtration. Firstly, the waste water from the sand washing plant is put into the thickener tank to add flocculant for rapid concentration, and a large amount of waste water is discharged. After concentration, the solid-liquid mixture enters the high-efficiency filter press to filter the remaining water, making the solid water content reach 15% - 20%, which can be directly transported and discharged.
The water treatment system of the sand washing production line has the following characteristics:
1.High efficiency and energy saving
There is no power in the thickening of the water treatment system. The thickener tank with optimized structure can make the waste water stay in the thickener tank for a short time to achieve the concentration effect. The filter press is powered by the feed pump, without additional energy consumption. The sand washing water treatment system can realize large-scale production and can be used normally with 50-1000tph sand washing production line.
2.Less investment
Different from the traditional water treatment system, the sand washing water treatment system only needs to invest simple equipment to realize large-scale production. The equipment structure is simple, the cost is low, the operation cost is low, the infrastructure construction is less, and the cost can be recovered quickly.
3.Small footprint
Because the sand washing water treatment system adopts the rapid concentration process, the smaller equipment can complete the large-scale production, and the system of the same scale adopts the smaller equipment, and the equipment occupies a small area.
4.Emission standard
The production line is designed according to domestic and international environmental protection standards. The treated wastewater becomes pure solid and clear water, which meets the domestic and international environmental discharge standards and can be used in sand washing production lines all over the world.
In view of the above characteristics, the sand washing wastewater treatment system produced by sinonine has been rapidly popularized and applied with good results. If the water treatment system is used together with the sand washing and fine sand recycle machine produced by sinonine, a complete sand washing production line can be formed.
In the actual production, the sand is cleaned by the sand washing and fine sand recycle machine, and the fine sand is recovered at the same time, and then the water treatment system is used to treat the waste water after sand washing, forming a complete sand washing production solution.
The content of soil and impurities in sand is an important index in the design of water treatment system. Before the design of sand washing wastewater treatment system, it is necessary to clearly understand the content of sand components and design a reasonable system combined with the treatment capacity.
The requirement of float-glass fine sand particle size is 0.1-0.5mm, the iron content of fine sand is below 600ppm, and the SiO2 content is above 98%. The specific production process of the line is as follows
Due to the large amount of sludge and other wastes, the sewage after sand washing needs to be treated before it can meet the requirements of environmental protection.
As the executive part of VSI sand making machine, the service life of the rotor directly determines the maintenance cycle and startup rate of the equipment.
Spiral sand washing machine is an important equipment which is used to washing sand or dewatering.
Sand washing machine is one of important equipments in sand washing plant.
Attrition scrubber as one of the hot-sale machines in sand washing plant.
Widely used equipment in the sand washing plant for muddy water treatment and dewatering process mainly includes: dewatering screen, spiral classifier, hydrocyclone, filter press, ceramic filter, Rotary centrifuge ,desliming cone and so on.
Recently, the production of Sinonine quartz sand processing and sand washing equipment is busy.
Thank you for your interests in Sinonine, Please feel free to submit your inquiry information to us, our expert will contact with you as soon as possible.