May 04, 2021

Dewatering and dewatering equipment in sand washing plant

Dewatering is very important for quartz sand plant. Dewatering is an important part of sand washing plant. The silica sand concentrate and tailings need to be dewatered to a reasonable moisture content to facilitate transportation and storage. Meanwhile, a large amount of water needs to be recycled. The treated quartz sand concentrate and tailings need to be dewatered to recover most of the water, and then recycled after treatment, so as to save a lot of water resources, avoid discharge and protect the environment.
sand washing plant
Dewatering of silica sand concentrate
The grain size of silica sand concentrate is generally 0.1-0.7mm. It is suitable to concentrate to about 60% by desliming cone, and then dewatered by spiral dewatering machine. The moisture content reaches about 20%, and then further dehydrate by dewatering silo or dewatering screen. The moisture content reaches 10%, and then put it in concentrate warehouse for natural drying. The moisture content is reduced to less than 5%. If the quartz sand concentrate needs to be dried, it can be dried to less than 1% in the quartz sand dryer.
spiral dewatering machine
Dewatering of quartz sand tailings
Quartz sand tailing consists of tailing mud, magnetic mineral tailing and fine material with particle size less than 0.1 mm. As for the tail mud, if the concentration is less than 10-20%, it should be discharged into the thickener first, and a large amount of water should be recycled after concentration, and then the pulp is concentrated to about 50% density. After concentration, the residual water is filtered out by ceramic filter or press filter, and the tailing mud with about 10% water content is discharged dry.
ceramic filter
Quartz sand tailings contain a lot of valuable components, which need to be treated separately. The treatment process is basically the same as that of quartz sand concentrate. After being concentrated by desliming cone, they are treated by spiral dewatering machine or dewatering screen until the moisture content is about 10% for storage.
sand washing plant
High quality dewatering equipment has a great influence on the dewatering effect of quartz sand. The appropriate thickener should be selected according to the processing capacity and water consumption of the whole sand washing plant, so as to ensure sufficient concentration time and water consumption, maximize the use of reclaim water and add new water to the minimum. Then select the dewatering equipment with strong dewatering capacity and good dewatering effect to make the final product take away as little water as possible.

For more information about sand washing plant and its dewatering equipment, please visit SINONINE website www.9silica.com, or contact us directly by +86-18118821087(WhatsApp).

Lasted news & technology
Nov 16 2021

In this paper, the processing of photovoltaic glass ultra silica sand is introduced in detail. The Fe2O3 in silica sand is reduced to less than 90ppm by flotation with common quartz sand as raw material to meet the quality requirements of ph

Nov 13 2021

The most direct index to measure the purity of high purity quartz sand is the content of alkali metals, key transition elements, aluminum and boron in raw materials.

Oct 31 2021

How to reasonably design the water circuit and how to reuse the water produced in each section of the sand washing plant after treatment are very important issues.

Oct 16 2021

Fracturing sand washing plant is generally divided into five stages, namely sand mining stage, sand pre screening stage, sand washing classification stage, fine sand drying stage and finished product screening and packaging stage.

Jun 26 2021

This article describes a sand washing plant for low expansion foundry sand.

Jun 24 2021

The sinonine team has invented sand washing plant of removing iron from quartz sand through continuous exploration.

Jun 15 2021

The season of continuous spring rain will still have a serious impact on the production of quartz sand.

Jun 10 2021

In the sand washing plant, if we want to produce high-purity quartz sand, we need to choose the right raw materials, so how to determine the raw materials of high-purity quartz sand?

Contact us

Thank you for your interests in Sinonine, Please feel free to submit your inquiry information to us, our expert will contact with you as soon as possible.

Name
Email
Tel
Country
Message
sinonine@9silica.com
+86-25-58875679
+86-18118821087